Recently, according to the 342nd batch of MIIT announcement, Dfsk has declared a new k01 microcar chassis. According to the declaration information, the new vehicle will be equipped with a new appearance cab, and will be equipped with a new Xiaokang power of 2.0L displacement, with a maximum output of 143 horsepower, to meet the national six emissions.
Before that, Dfsk k01 micro truck models are basically equipped with Xiaokang 1.5L, 1.3L gasoline power, so the car will be more interesting in terms of power.
According to the announcement picture can be seen, this new appearance of the cab with a large area of blackened center grid grille, this design should be said to be a maverick existence inside the tiny truck.
But considering that the audience of the model may not be able to accept this exaggerated appearance, but also provides another relatively conservative appearance design, blackened area is greatly reduced, but the lower part of the same color as the body of the air intake mesh design is still exaggerated. Do you like this more avant-garde styling design on the microcar?
The new car outline dimensions of 5390x1785x1910mm, wheelbase of 3360mm, the overall mass in about 1.255 tons, on the total mass of 2.455 tons of the announcement.
Power, is the biggest highlight of the new car Dfsk k01, equipped with Chongqing Xiaokang power of the new SFG20B engine, 2.0 liter displacement, maximum output power 143 horsepower, in line with the national six emission standards, the power in the data can hang most of the tiny card.
As a micro truck, the previous Xiaokang models are basically powered by Xiaokang 1.5L and 1.3L gasoline engines, which can basically meet the needs of users. The introduction of the new 2.0-liter Xiaokang power will undoubtedly give wings to this micro truck, making it a truly versatile and practical micro truck model.
Disadvantages
However, it should be noted that the rear suspension adopts 6 steel plate springs, which is reasonable for its load-bearing capacity and large power output, but the use of a single tire at the rear is not good.
● Afterword.
Dongfeng Xiaokang brand models are mainly micro-face and micro-truck models, in the domestic brand micro-face and micro-truck inside its chassis and engine quality is relatively good, the important thing is that the price is relatively affordable, has been used as a good helper for the user to get rich, and the introduction of the 2.0-liter power, no doubt for those who have power needs and the pursuit of high-end driving experience is a good choice, this Xiaokang Microcar is also worth looking forward to.
Manufacturer's guide price:
$5678
Local Lowest Price:
Ask for Base Price
Basic Information
Announcement Model：
DXK1021TKH
Type
Truck
Drive form：
4X2
Wheelbase：
2515mm
Box length class：
2：3m
Engine：
Xiaokang Power DK12C
Transmission：
5-speed gearbox
Body length：
3：96m
Body width：
1：56m
Height：
1：825m
Front wheelbase：
1310mm
Rear wheelbase：
1310mm
Overall vehicle weight：
0：88t
Rated load：
0：76t
Total mass：
1：77 tons
Maximum speed：
100KM/h
Place of origin：
Chongqing
Tonnage class:
Micro Truck
Approach angle：
37 degrees
Departure angle：
35 degrees
Market Segment：
Less-than-truckload transport
Front overhang/rear overhang：
0：59/0：855m
Engine parameters
Engine model：
Xiaokang power DK12C
Engine commonly known as
Xiaokang gasoline 1：3L
Number of cylinders：
4
Fuel type：
Gasoline
Cylinder arrangement: In-line
In-line
Displacement：
1：24L
Emission standard: National six
National six
Maximum output power：
67kw
Max： horsepower：
88hp
Max： torque：
115N-m
Max： torque speed：
4400RPM
Rated speed：
6000RPM
Cargo box parameters
Cargo box form：
Bar-board type
Length of cargo box：
2：26m
Width of cargo box：
1：44m
Height of cargo box：
0：34m
Cab parameters
Permitted number of passengers：
2 people
Seating rows：
Single row
Transmission parameters
Transmission type: 5-speed
5-speed transmission
Gearshift mode：
Manual
Forward gears：
5 gears
Number of reverse gears：
1
Tires
Tire specification：
165/70R14
Number of tires：
4pcs
Fuel tank
Fuel tank/gas tank capacity：
Chassis parameters
Allowable load of front axle：
590KG
Allowable load of rear axle：
855KG
Number of spring plates: -/5
-/5
Suspension type （front/rear）
Brake
Braking Form：
Handling configuration
ABS anti-lock：
●
Steering assistance：
●
Lighting configuration
Front fog lights：
○
Headlight height adjustment：
-