How to adjust the bumper seam? How to adjust the bumper gap
The reason for the gap in the front bumper of the car:
(1) First rule out buying fake accessories
(2) The bumpers are all adjustable, let the master adjust it again
(3) The possibility of hurting metal parts is unlikely. Even if it is hurt, it is fine. Find a patient master to knock on it. This is not difficult to repair, but it is troublesome.
The solution to the gap in the front bumper of the car:
(1) If the front cover is too high due to the lock, you can adjust the position of the lock on the cover to make the cover tighter
(2) There is a set of clips between the front bumper and the car. It is recommended to check to see if the clips are locked or tripped. If they are tripped, you can find a repair shop to change a set of bumper buckles. The price of bumper buckles is very cheap. , Generally a few cents to a dollar.
There is a big gap between the front and rear bumpers, what should I do?
1 Open the cover;
2 There are black rubber piers on the left and right sides of the water tank frame behind the central grid, which are used to hold the cover of the machine;
3 Rotate the black rubber piers left and right by hand to adjust the gap between the machine cover and the center net.
The role of the hood:
1. Air diversion. For objects moving at high speed in the air, the air resistance and turbulence generated by the airflow around the moving objects will directly affect the trajectory and speed of the movement. The shape of the hood can effectively adjust the flow direction of the air relative to the car and the obstacle to the car. The force acts to reduce the influence of air flow on the car. Through the diversion, the air resistance can be broken down into beneficial forces, and the force of the front tires on the ground is increased, which is conducive to the stability of the car. The appearance of the streamlined hood is basically designed according to this principle.
2, protect the engine and peripheral pipeline accessories, etc. Under the hood, there are important components of the car, including the engine, circuit, oil circuit, brake system, and transmission system. Essential to the vehicle. By improving the strength and structure of the hood, adverse effects such as impact, corrosion, rain, and electrical interference can be fully prevented, and the normal operation of the vehicle can be fully protected.
3, beautiful. The exterior design of a vehicle is an intuitive manifestation of the value of the vehicle. As an important part of the overall appearance, the hood plays a vital role, pleasing to the eye, and embodies the concept of the overall car.
4, assist driving vision. When the driver is driving a car, the front line of sight and the reflection of natural light are essential for the driver to correctly judge the road and front conditions. The shape of the hood can effectively adjust the direction and form of the reflected light, thereby reducing the impact of light on the driver.
5. Prevent accidents. The engine works in a high-temperature, high-pressure and flammable environment, and there are accidents such as explosion, combustion, or leakage due to overheating or accidental damage to the original. The hood can effectively block the damage caused by the explosion and play a protective shield. Effectively block the air and prevent the spread of flames, reducing the risk and loss of combustion.
6. Special purpose platform. Among special vehicles, a high-strength hood is used as a working platform to play a supporting role.
related information:
bumper
Car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the body. Many years ago, the front and rear bumpers of automobiles were stamped into channel steel from steel plates, riveted or welded to the frame rails, and there was a large gap with the body, which looked very unsightly.
With the development of the automobile industry and the large-scale application of engineering plastics in the automobile industry, automobile bumpers, as an important safety device, have also moved on the road of innovation.
Today's car front and rear bumpers not only maintain the original protection function, but also pursue harmony and unity with the body shape, and pursue their own lightweight.
The front and rear bumpers of a car are made of plastic, and they are called plastic bumpers. Generally, the plastic bumper of a car is composed of three parts: an outer panel, a cushioning material and a beam. The outer plate and buffer material are made of plastic, and the beam is punched out of cold-rolled sheet to form a U-shaped groove;
The outer plate and cushioning material are attached to the beam.